Contact
Tel
+86-0516-81118080
ADD：Fengxian Electric Vehicle Industrial Park, China
FAX：+86-0516-81110000
WEBSITE：www.bangongchuanglian.cn/enindex.aspx
Industry Dynamic
One, pinch the brake to the end, open the key, delay about 6 seconds, release the brake can!
Two, the above operation repeat twice, or directly pinch the brake, pinch to the end, switch the key twice, delay about 6 seconds, release the brake!
Three, hold the brake to the end, switch key three times, release the brake!
Four, hold the brake to the end, open the key, delay 6 seconds, release the brake accelerator, at this time, the oil door motor does not turn and turn the key again can be closed!
Five, open the key before holding the brake, or for low speed
Six, hold the brake to the end, open the key, return to the position and keep 6 seconds to loosen!
7. Hold the brake to the end to open the key hold the button for cycling mode delay for about 6 seconds, and then release it. The function selection button here is actually another brake switch, that is, the button can be directly pressed and pressed to the end to delay the opening key. Can be opened to restore the way:
1, hold the brake accelerator to the end, open the key to return to the end of two delay of 6 seconds or so to release the brake accelerator can resume!
2, with the first way to get rid of the recovery, that is, pinch the brake accelerator to the end, the opening key delay 6 seconds, release the brake accelerator can!
3, pinch the brake accelerator to the end, the opening key delay 6 seconds, release the brake can resume!
4, pinch the brake, pinch to the end, open the key, delay 6 seconds, release the brake!
5, direct open key for low speed!
6, hold the brake to the end, open the key delay 6 seconds, release the brake, re-open the key can be!
|
PREV:Principle and maintenance method of controller
NEXT:Electric vehicle controller replacement considerations |
Go back |
